There’s nothing like a refreshing shower in the lovely hot weather we’re having. So here’s some important trivia for you!

Did you know, that any room with a Bath or Shower is divided into “Zones” for the purposes of Electrical Safety?
 
Any light fitting, switch, shaver unit, fan or device MUST be approved for use in the Zone in which it’s going to be used.
Zone 0 is inside the bath or shower itself.
Zone 1 is directly over the bath or shower up to 2.25m high.
Zone 2 is a 60cm area further outside of Zone 1
 
Take a look around your bathroom and make sure you’re happy about your electrics. If not, get a Part P Approved Electrician to check it out.
 
Also remember, if you have a shower cubicle in a bedroom, you can’t have a 13amp socket within 3 meters of it. Keep Safe and if you need any advice call us on 01772 615428 or email us
 

Zone information from Currelec